|
|
Replica Design of L-40 "Meta Sokol " Airctaft - fuselage
Růžička, Miroslav ; Pešák, Miroslav (referee) ; Píštěk, Antonín (advisor)
This diploma thesis deals with the design of all-metal construction of fuselage of the replica L-40 Meta Sokol aircraft on the basis of CS-VLA regulation. As far as the aircraft is concerned, the thesis establishes the load of tail surfaces, landing gear and engine bed. Futhermore, it designs the construction of fuselage, tail landing gear, including the system of its retraction, wing-fuselage connection, engine bed and the primary design of cockpit. In the end, the thesis focuses on the fuselage production technology.
|
|
|
Automatization of production technologies status monitoring
Molent, Michal ; Číka, Petr (referee) ; Krajsa, Ondřej (advisor)
The bachelor thesis focuses on with a description and design of automated surveillance over operation of production technologies from the initial collection and processing of information to the presentation of the results in the company´s intranet and their archiving. In the first part the proposal is described theoretically with possibilities of advanced solution of the given issues. The second part occupy of with the initial proposal for the solution. The third part is focused on the implementation of the prototypical implementation of an automated surveillance for application in an industrial environment. The Fourth part focus on testing all system, which is used in two factoring halls D and E.
|
|
|
Marketing Mix of a Company
Hudec, Martin ; Chlebovský, Vít (referee) ; Kaňovská, Lucie (advisor)
The diploma thesis is focused on marketing mix of family viniculture. The theoretical part defined basic marketing concepts and variables of marketing mix. The analytical part contained detailed analysis, which are source for proposed part like a ways for improving of the marketing mix of the viniculture.
|
|
|
MEMS based energy harvesting
Klempa, Jaroslav ; Prášek, Jan (referee) ; Gablech, Imrich (advisor)
This work is dedicated to principles of energy harvesting or scavenging from free energy around us. Energy harvesting principles are described in the first part. Following chapter is devoted to description of piezoelectricity and piezoelectric materials. Next part researches already reported results on piezoelectric energy harvesters. Following chapter shows simulations on designed structures in ANSYS® Workbench. Next the fabrication of the structures is described. Measurement are made regarding to maximum generated power.
|
|
|
Reduction of the body weight of passenger cars based on material choice
Petrucha, Roman ; Pernica, Vítězslav (referee) ; Šenberger, Jaroslav (advisor)
This bachelor thesis contains a description of the most commonly used materials and manufacturing technology for the body of cars. For this purpose, in the first chapter describes the vehicle body with the safety requirements that are placed on it. There are also analyzed the benefits of the overall reduction in vehicle weight. The following chapter describes the materials which are used for the construction of the body. The last chapter discusses the issue manufacture of bodies, where are analyzed some manufacturing technologies.
|
|
| |
|
|
Recent Trends in Research and Development of Thermal Barrier Coatings
Malík, Petr ; Slámečka, Karel (referee) ; Čelko, Ladislav (advisor)
Bachelor thesis focuses on recent trends in research and development of thermal barrier coatings which significantly contribute to increase in efficiency and service time of aircraft gas turbines. This work is a literal recherche on this topic which includes complete overwiev of surface treatment for high temperature applications, especially thermal barrier coatings. The most widely used technologies of coating processes and testing methods of thermal barrier coatings are included as well.
|
|
|
Production technology of a lifting equipment for tractor cooler
Raiskup, Martin ; Fiala, Zdeněk (referee) ; Zemčík, Oskar (advisor)
The thesis focuses on production technology of the lifting equipment for a tractor cooler. This device is used in order to ease the installation of a cooler during the manufacturing of a tractor. In the first chapter, various types of the lifting equipment are described. In the following chapters manufacturing methods, machines and tools for the production of the specific component are described. Furthermore, materials and manufacturing processes for the complementation of the specific component are proposed. In the conclusion, the methods for the manufacturing are suggested, the timescale is calculated and the technical-economical evaluation is performed.
|
|
|
Production technology for ball nut body
Sevryugin, Anton ; Sliwková, Petra (referee) ; Zemčík, Oskar (advisor)
This thesis presents proposals of production technologies based on the drawing of a ball nut. The content of the thesis is finding out the purpose of the part in the machine unit, analyzing similar production processes, detail drawing analysis, developing manufacturing technologies, including machine and material equipment. In this thesis all the necessary technological problems are formulated and solved, such as calculation of cutting conditions, machine time and costs. The proposed production technologies are compared and in conclusion of the thesis is a brief summary of achieved results, their evaluation and selection of the appropriate production technology and some recommendations are given.
|
|
|
Production technology for part of metal cuting machine.
Kachyňa, Stanislav ; Zemčík, Oskar (referee) ; Zemčík, Oskar (advisor)
This thesis deals with design for manufacturing technology single part on machine FS, which is the connecting part. Work deals with the material of this component, therefore, cast iron with lamellar graphite, the properties of this material, primarily focusing on the machinability. Due to the shape and dimensions of the workpiece is also described problems cutting of box parts, the most common operations used in their manufacture, including cutting tools and materials. These findings are then applied in terms of the company TOS Kuřim - OS a.s. An analysis of current manufacturing technology and design is made for its amendment. In conclusion with the technical-economic evaluation.
|
guest ::
